ITT :: Remote Desktop For Computer Having Dynamic ip

Remote Desktop For Computer Having Dynamic IP

1. Using hamachi:-

Introduction
:-
The Reason which stop you from connecting to remote computer using dynamic ip is that your isp provide you two ip one which is inside the Lan and other outside the lan this is that ip which change every time you On your computer or restart connection( so because of that conflict you can do remote connection with computer). so one way of doing remote connection would be by joining same lan(then we don't need to go outside the lan) and then connecting to the computer. therefore for this we use hamachi(software) which you can download from here  http://www.ziddu.com/download/8296376/hamachi.msi.html.

Steps:-
1. As soon as downloading gets over install it into your computer in the process of installing it will ask you for
a) Your name
b) Network to join(you can create a network)
c) password of network(give password for that network)
here you can consider network as one lan and to join any network you must know password because you want to connect to your friends computer so tell your friend to join the network that you have created.
2. once hamachi is installed look at system tray you will found here a three green dots in traingular form (appeared) click on it.
3. then you will get a window as shown.

the ip shown on the above part of this window is your ip address and similarly your friend will get different one. after you both join the group you both will be listed into your network. hence now you can use these ip address for remote connection.
NOTE:- you can use my network
network: tarunkumarsinghal


2. Using Ammyy Admin
Introduction:-
other way of remote connection is using other software.
there are so many software on the web that can be used for remote connection. but most of them are so complecated that we first have to read about them on net before we use it. so to sovle this problem i have found one software which is very easy to use and operate. named ammy admin it is a free software.

Steps to use it for remote connection are as follow:-
1. downoad it from here   http://www.ziddu.com/download/8296362/AMMYY_Admin.exe.html.
2. start by double clicking.
3. a window will open ask your friend for it your id and write it into your windows box and click connect and that' it.
4. Now enjoy remote connection.

0 Response to "ITT :: Remote Desktop For Computer Having Dynamic ip"

Post a Comment

Share

Twitter Delicious Facebook Digg Stumbleupon Favorites More