The FlexPoint 100FF Single-Mode to Multimode Fiber Converter supports Ethernet and Fast Ethernet and Token Ring.
| Flexpoint 100FF |
Single-Mode to Multimode or |
Multimode to Single-Mode |
Fiber Converters |
for 100FX -100TX Fast Ethernet |  |
The FlexPoint 100FF Single-Mode to Multimode Fiber Converter supports Ethernet and Fast Ethernet and Token Ring. Capable of extending network distances up to 58 km (36 mi.) over single-mode fiber.
Available with SC and ST connectors in a variety of both multimode and single-mode fiber combinations.
Operates in half duplex or full duplex.
Supports 10Base-FL, 100Base-Fx and IEEE 802.3 specifications.
Wall-mountable or rack-mountable on a 5-unit shelf or in the 14 unit power-redundant FlexPoint Powered Chassis.
Out-of-the-box plug-and-play operation.
Software-independent.
Lifetime warranty.
Available with SC and ST connectors in a variety of both multimode and single-mode fiber combinations.
Operates in half duplex or full duplex.
Supports 10Base-FL, 100Base-Fx and IEEE 802.3 specifications.
Wall-mountable or rack-mountable on a 5-unit shelf or in the 14 unit power-redundant FlexPoint Powered Chassis.
Out-of-the-box plug-and-play operation.
Software-independent.
Lifetime warranty.
The FlexPoint 100FF Single-Mode to Multimode Fiber Converter is a member of the modular FlexPoint product line. The FlexPoint product line supports the IEEE 802.3 standard and provides an extensive range of connectivity options across different media types.
The FlexPoint 100FF Single-Mode to Multimode Fiber Converter provides a cost-effective solution to extend network distances by connecting multimode fiber networks or devices over single-mode fiber cabling.
The FlexPoint 100FF provides diagnostic data through LED indicators that assist in network installation and maintenance. The LEDs report the availability of power and the detection of devices attached to the fiber ports.
The FlexPoint 100FF offers several mounting options. It can be mounted stand-alone utilizing optional wall-mounting hardware. It can also be rack-mounted using a 5-unit rack-mounting shelf or be installed in a rack-mountable, high-density, 14-unit, power-redundant chassis.Specifications
| FlexPoint 100 FF | ||
 Connectors and Cables: | ||
Fiber: | SC or ST | |
Multimode: | 50/125, 62.5/125, 100/140 µm | |
Single-Mode: | 9/125 µm | |
| Supported Distances: | ||
| Ethernet and Token Ring: | ||
| Multimode: | 5 km/16,400 ft. | |
| Single-Mode: | 20 km/66,000 ft. | |
Fast Ethernet: | Half-Duplex | Full-Duplex |
MM/Sx, 850 nm: | 412 m/1,350 ft. | 500 m/1,640 ft. |
MM/Lx, 1300 nm: | 412 m/1,350 ft. | 5 km/3.1 mi. |
SM/Lx, 1300 nm: | 412 m/1,350 ft. | 28 km/16.8 mi. |
SM/Lx/LH, 1300 nm: | 412 m/1,350 ft. | 58 km/36 mi. |
| Indicators: | ||
Power: | LED, Yellow, power applied | |
Fiber Link/ Receive: | LED, Green, Link/ data received | |
| Dimensions/Weight: | W:3.0"xD:4.0"xH:1.0"/ 6 oz. | |
| Power: | 9 VDC/500 mA or 5 VDC/750 mA | |
| Physical/ Environmental: | ||
| Temperature: | Operating: 0 to 70 degrees C | |
| Storage:: -40 to 80 degrees C | ||
Humidity: | 0-90% (non-condensing) | |
Ordering Info
DC power the X will be 0
as in 4411-0
115VAC power the X will be 1
as in 4411-1
220VAC power the X will be 2
as in 4411-2
DC power the X will be 0
as in 4411-0
115VAC power the X will be 1
as in 4411-1
220VAC power the X will be 2
as in 4411-2
| Model | Port 1 | Port 2 | ||
Media Type | Distance | Media Type | Distance | |
| 4411-x | MM/SC/Lx 1310 nm | 5 km | SM/SC/Lx 1310 nm | 28 km |
| 4412-x | MM/ST/Lx 1310 nm | 5 km | SM/ST/Lx/LH 1310 nm | 58 km |
| 4413-x | MM/SC/Lx 1310 nm | 5 km | SM/SC/Lx/LH 1310 nm | 58 km |
| 4410-x | MM/ST/Lx 1310 nm | 5 km | SM/ST/Lx 1310 nm | 28 km |
| 4414-x | MM/ST/Sx 850 nm | 500 m | SM/ST/Lx 1310 nm | 28 km |
| 4415-x | MM/SC/Sx 850 nm | 500 m | SM/SC/Lx 1310 nm | 28 km |
| 4416-x | MM/ST/Sx 850 nm | 500 m | SM/ST/Lx/LH 1310 nm | 58 km |
| 4417-x | MM/SC/Sx 850 nm | 500 m | SM/SC/Lx/LH 1310 nm | 58 km |
| 4418-x | MM/ST/Sx 850 nm | 500 m | MM/ST/Lx 1310 nm | 5 km |
| 4419-x | MM/SC/Sx 850 nm | 500 m | MM/SC/Lx 1310 nm | 5 km |
| 4420-x | MM/ST 1310 nm | 5 km | MM/ST 1310 nm | 5 km |
| 4421-x | MM/SC 1310 nm | 5 km | MM/SC 1310 nm | |
0 Response to "ITT :: Fiber Converters"
Post a Comment